Velox – 5 Axis CNC WOrk Center

Velox 5 Axis CNC Work Center Specification

Designed upon a portal geometry, it features 2 working tables working independently or simultaneously in case of large size components.

Each table is equipped with movable traverses and tables. The modular system of the tables allows the easy and rapid application of optional clamping system or tip-tailstock with continuous rotation, controlled by the CN axis.

Ideal to process complex pieces in a single positioning.

e-Catalog

STANDARD HEAD

Working Head T2+2 Velox 5 Axis CNC Work Center

Specification T2+2

MODEL	T2+2
Spindle Power	2 - 4 x 7.5 kW (10)
Rotating Speed	18.000 (24000) g/min - rpm
Tool Attachment	2 - 4 x ER32

OPTIONAL HEAD

Working Head T1 Velox 5 Axis CNC Work Center

T1

One motor housed in hardened aluminium casting support, to create a perfectly rigid and compact unit. Ideal in all machining where the least encumbrance is needed. It is available with different powers and rotation speeds. The cooling system can be either by air or by liquid.

Working Head T2 Velox 5 Axis CNC Work Center

T2

1 double spindle motor on a single arm support. It is used in all those applications where few tools are needed (maximum 2) such as veneer bended seat sheels or plastic components after being pressed.

CU12

The drum-type tool magazine with 12 positions, model CU12, is an independent structure placed on one side of the machine. The rotation and this positioning the tool holder disk takes place by means of a bushless motor and its drive, being an axis controlled by the numerical control.

STANDARD WORKING TABLE

Working Tables Tandem Velox 5 Axis CNC Work Center

The TANDEM system is made up of beams and pods with integrated vacuum, adjustable between them in X and Y in such a way as to adapt to the shape of the workpiece. Possible placement of the piece directly on the beams by removing the raised pods: even greater working area in Z!.

OPTIONAL WORKING TABLES

Flat R

Flat A

Flat + Tandem

Flat + Pods

Working Tables VT Velox 5 Axis CNC Work Center

VT

STANDARD CLAMPING DEVICE

Standard Clamping Block Velox 5 Axis CNC Work Center

The clamping cylinders type BLOCK can be placed in any of the four sides of the aluminium pods. These ones have, in fact, a groove all around where the clamps are easily fixed by means of 2 screws. The clamping movement is from the top downwards. They are normally used to lock pieces of regular shape with the use a of a jig.

OPTIONAL CLAMPING DEVICES

Standard Clamping Air+ Velox 5 Axis CNC Work Center

Air Plus

Air

Pillar

Turn

POSITIONING SYSTEM (QUICKSET)

Positioning System Setup Velox 5 Axis CNC Work Center

To minimize the set-up times of the work centre there are 2 possible systems, both automatically managed by the software e-Lab.

Positioning System Brush Motor Velox 5 Axis CNC Work Center

Each element of the table (such as rails, TANDEM pods and clamping cylinders) automatically move to the programmed position, by means of brushless motors and digital drives.

Positioning System Quickset Video

Kunjungi Youtube channel PT. Alpha Utama Mandiri untuk melihat berbagai macam update konten video mesin-mesin perkayuan terbaru.

Youtube Channel

LOADING SYSTEM

Both tables with automatic loading/unloading

Loading System Phase 02 Velox 5 Axis CNC Work Center

LH-Table with manual loading and vacum clamping +RH-Table with automatic loading/unloading

Loading System Phase 03 Velox 5 Axis CNC Work Center

Only one automatic loading / unloading magazine for long pieces. The second hopper feeder moved aside in parking area

Loading System Phase 04 Velox 5 Axis CNC Work Center

Both tables with manual loading / unloading and hopper feeders moved aside in parking area

WORK ACCESSORIES

TST

2Point

Barcode

Digit

Pivot

Toolint

PROGRAMMING

Programming Phase 03 Velox 5 Axis CNC Work Center

With eLab we offer complete managemen of our machining centers in an easy-to-use three-dimensional graphical environment. eLab’s features and benefits are numerous:

a programming system easy-to-use even by least
a tool path manger that insures smooth movements without interruption
a graphic simulator with collision control
calculation of real cycle times. Cost to manufacture parts can be calculated with full knowledge of machining time.
a true virtual reality of what you will do on your machine, placing all clamps and fixtures to the desired position. The costs of initial set up, testing and fine tuning the program are minimized.
freedom to import profiles created in other CAD/CAM program, allowing you to directly manage them