UOST-48 – Sliding Table System

Stock Number	UOST-48
Crosscut with fence on infeedi side	31" (787mm)
Crosscut with fence on outfeed side	49" (1245mm)
Length of fence	63" (1600mm)
Length with extension stop	72" (1829mm) W/O ext.
Table (Alum)	30 1/4"x29 1/2" (769mm x 749mm)
Working space required to left of saw	30" (762mm)
Front to rear	69 1/2" (1753mm)
Net weight	82kgs(180Lbs)10"/12"
Net weight	85kgs(187Lbs)10"SS/12"SS/14"

STANDARD EQUIPMENT：

New swing arm design makes the sliding table much easy to install, align and use than other sliding tables
Fitted with 10″ , 12″ , 10”SS ,12” SS and 14″ Union-one circular saw
Will be fitted most 10″, 12″ and 14″ closed cabinet tablesaws(the depth of table 38mm at least)
Large table surface rides on ball bearings and needle bearings to make the movement much smoother
Completely adjustable for perfect alignment

Features the capability to cross cut a 48″ wide sheet by mounting the alignment fence on the backside of the table
No matter the Fence is installed in front or back of sliding table, it can be adjusted according to the operator needs the angle from 0 to 45 degree
Sliding table can be locked when not operate. The table will keep stable.
When installing with existing tablesaws, the left wing needs to be removed and the rail set needs to be cut even with the main table