
Stacker 127-C
Auto Stacker for Core Stacker
The machine has SORTING LEVEL feature which can be used for 4 x 4 inch and 2 x 4 inch.
The sorting level is a point that if stack the board which the size is within 4 x 4 inch. Then the machine will sort out three different grades of boards and stack it into 2 piles. That means the bad boards will drop out the machine directly while the first grade boards can be stacked into one pile and the second grade boards can be stacked into the other pile.
If the size of the board is 4 x 6 inch or 4 x 8 inch, the machine will sort out into two different grades of boards and stack it into 1 pile.
That means the bad boards will drop out the machine directly while the good boards will be stacked into one pile only



Specification Stacker 127-C
Model | Stacker 127-C |
---|---|
Lamination width | 650 - 2600 mm |
Lamination length | 960 - 1270 mm |
Lamination thickness | 1 - 3.6 mm |
Lamination speed | less than 120 m/min |
Lamination height | under the 1200 mm |
Sorting level | grade 3 double stack (fur hole board grade 1) *below 1360: divided two level and two stomps) over 1360: divided two levels and two stomps) |
Overall dimensions | 13 x 2.9 x 2.1 m |
Installed power | 35 kW |
Fan specification | 2.2 kW 8 sets (fan frequency conversion) |
Lift way | hydraulic lifting |
Fur transfer | comes with the machine |
The whole plate gaiden | comes with machine reducer chain, external transmission (automatic gaiden) |
Crub weight | 4.7 t |
Motor Number and Power | ||
---|---|---|
Hydraulic power unit | Q'ty: 2 sets | (3 kW/set) |
Out-feeding | Q'ty: 4 sets | (1.5 kW/set) |
Fan | Q'ty: 6 sets | (2.2 kW/set) |
Transmission | Q'ty: 2 sets | (1.5 kW/set) |
Waste transfer | Q'ty: 1 sets | (1.5 kW/set) |
Playing board servo motor | Q'ty: 2 sets | (2.6 kW/set) |