SP-2130
Lacquered Sanding
Detail of Machine of Lacquered Sanding
Sanding Belt Oscillation Control
The sanding belt oscillation is controlled by a dust proof air eye. The sanding belt can oscillate in the event of power failure. The oscillation range of the sanding belt is 15-20 mm. The reverse and cross sanding on the panel creates a better clarity of grain, thus greatly extending the life of the sanding belt.
Digital Readout Controlled
The conveyor lifting by digital controller and PLC touch screen. Specially designed to automatic operation such as roller, table control and error message
Automatic Stop
Limit switches are fitted at both sides of the sanding belt to prevent the belt running from the track. The machine will stop automatically if there is no air supply, no sanding belt mounted, or if the belt becomes loose. Only the elevation driving motor will function. The machine will brake immediately if the sanding belt breaks during operation, providing maximum safety for operator and machine.
Two Heads Configurations
Two heads: 1st and 2nd are roller type is ideal for lacquered, sealer, UV-coating sanding. Working width from 610 – 1300 mm. Single and Double and Three heads are available.
Belt Cleaning Device
To ensure a clean and smooth grain surface on the abrasive belt, air is blown to thoroughly clean any dust. This greatly increases the belt’s life. Once the conveyor starts, the device is also starts. A timer is equipped for controlling the sanding invervals.
Hydraulic Drive Conveyor Belt
The super lightweight driving system is mounted at the end of the conveyor table, ensuring maximum feed accuracy and stability. A powerfull hydraulic driving system automatically adjusts to the correct pressure regardless of the panel weight or plate holding pressure. The system eliminates belt slipping or chattering while running.
High Quality Conveyor Belt
The machine employs an Italian imported high quality conveyor belt, ensuring extremely smooth feeding, minimum wear, and break free performance.
Brush Roller (Optional)
Clear away the dust on the working piece in the final step. Polishing roller is upon request.
Inverter (Optional)
The machine is built with a high performance frequency inverter which can be adjusted for any desired speed to accommodate a variety of paint and panel characteristic.
Specification SP-2130 Lacquered Sanding
| Model | SP-2130 |
|---|---|
| Max. working width | 1300 mm |
| Max. working height | 120 mm |
| Main spindle motor | 20 HP/15 HP |
| Hydraulic pump motor | 3 HP |
| Table movement motor (PLC Touch Screen) | 1 HP |
| Brush roller one set | 2 HP |
| Roller type | A-A (rubber roller-rubber roller) |
| Roller diameter | 420 - 420 mm |
| Feed speed | 0 - 18 m/min |
| Size of sanding belt | 1346 x 2616 mm (53" x 103") |
| Dust exhausted | 8000 m3/hr |
| Compressed air consumed | 0.2 m3/hr |
| Packing size | 2350 x 2300 x 2360 mm |
| Net weight | 3800 kgs |
| Gross weight | 4150 kgs |