Sanding Line 4 Side Straight / Curved Parts

Detail Machine Of Sanding Line 4 Side Straight / Curved Parts

Outstanding Features Of Sanding Line 4 Side Straight / Curved Parts

Application: wide range of sanding for curved wood parts, length 350 mm or more. Scrub before paint and rub off primer.

The CES line closely and flexibly combines a smoothing tape and a sanding brush, resulting in high quality finished wood products, with a smooth, even surface.

1. High working productivity:
   When using the CES line, the wood goes through 5 sanding machines in turn and is finished with 4 wood surfaces are finished at the same time, all machines are capable of flexibly adjusting, users can control work productivity at a high level.
2. Tightly combine abrasive belt, abrasive disc and brush shaft
   With the oscillation of the abrasive belt, which rotates continuously, direct contact with the wood edge helps the wood workpiece to become flat, removing the original ripple marks.
   After being smoothed, the edges are immediately sharpened and polished, thanks to a combination of disc sanding units located above and below the workpiece path. Finally, 2 powerful sanders on the bottom and 2 edges, will completely remove wood hair, smooth and polish the surface. All parts combine closely and flexibly to complete the wood billet, providing both high capacity and maximum quality response.
3. Easy to use, save labor
   The product is intelligently designed with a rubber roller that holds the wood billet head in place, helping the wood workpiece even in curved contours, but the abrasive tapes or brush shafts are always rubbed with high efficiency.