S2700
Horizontal Double-Sided Putty Machine (4 – 8 mm)
- This machine is used for plywood before laminate by face/back or paper, it is not necessary to be sanded after putty
- The putty is not dry after coming out from putty machine, it needs natural air for drying and it will take 2-3 days to dry. It also can be dried by dryer line
- The plywood cannot be laminated directly, it needs to be sanded before laminated
Calibration platform:
No. 10 channel steel, roller with wall thickness of 4 mm, 1.5 kW-4 stepless speed regulation motor, imported genuine Omron photoelectric switch
Main plane:
Steel plate channel steel structure: 20 mm steel plate, 140 x 140 x 6 square tube, 6 rollers with an outer diameter of 200 mm, gear carburizing and quenching process, Aix adjustable cylinder, upper and lower roller dual power separate transmission, 5.5 kW-4-pole motor, 2 hard-tooth surface reducers each, front steel knife, imported genuine Omron photelectric, lifting motor 0.55 kW-4, RV reducer, digital display shift system, the weight of the hos is 5.1t
Transition platform:
Angle steel square tube bracker
Drying rack:
160 x 80 x 6 mm rectangular tube, 40 x 40 x 3 mm square tube, 1.5 kW-4 motor with 1:300 double-stage worm gear reducer, imported genuine Omron photoelectric switch
Receiving transition platform:
50 x 50 x 5 mm square tube, 80 x 40 x 5 mm rectangular tube, 1.5 kW-4 motor CVT
Automatic board connector:
Profile frame structure square tibe materials: 100 x 100 x 5 mm, 80 x 60 x 5 mm, Aix adjustable cylinder, imported genuine Omron proximity and photoelectric switches
Blender:
Motor 4kW-4 poles
Feeder:
Motor 2.2 kW-4 poles
Standard lift table:
Channel steel plate structure: No. 10 channel steel, 35 mm thick steel plate, standard hydraulic system, motor 3 kW-4 poles
Distribution cabinet:
Ideal inverter, Chint contactor, Kewei display screen, Kewei PLC
Note: Double power S2700 double-sided putty scraping machine line have total length 15.2m and 28.25 kW total power
Specification S2700
| Equipment | Set | Specification (L x W x H) |
|---|---|---|
| Calibrating platform | 1 | 2 x 3 x 1.5 |
| Main plane | 1 | 4 x 1.9 x 1.8 |
| Transtion platform | 1 | 2.3 x 2.5 x 1.3 |
| Drying rack | 1 | 4 x 2.4 x 2.4 |
| Receiving transition platform | 1 | 1.75 x 2.4 x 1.6 |
| Automatic board connector | 1 | 2.15 x 4.2 x 2 |
| Blender | 1 | 1.15 x 1.15 x 1.1 |
| Feeder | 2 | 3 x 0.5 x 0.6 |
| Standard lift table | 2 | 2.3 x 1.2 x 0.6 |
| Distribution cabiner | 1 | - |