P62 – Thin Cutting Planer

The P-62 Thin cutting Planer is normally used together with a thin cutting frame saw. The P-62 is designed especially for precision thickness cutting for thin board. Under normal condition, the machine can easily reach ± 0.025 mm tolerance range.

The P-62 Thin Cutting Planer is designed with all new concepts and is patented. In particular, the board pressure system employs piano-key type pressure shoes, which holds board firmly. This fully prevents board from chamfetring or tearing during cutting.

Patented Cutterhead Design

Patented in Taiwan : M303096
Patented in China : ZL 2006 2 0124376.4

Two parallel cutterheads
Each cutterhead has constant distance of grooves
Two cutterheads are staggered
Two front ends of piano-key type pressure shoes extend over the cutterhead center

Download Catalog Mick & Jack P62 disini

Variable Spindle Speeds

The spindle rotation is controlled by a frequency inverter, permitting variable speed change. Wide speed is from 1800 rpm to 5600 rpm.

Variable Spindle Speeds

The spindle rotation is controlled by a frequency inverter, permitting variable speed change. Wide speed is from 1800 rpm to 5600 rpm.

Specially Designed Steel Roller and Conveyor

All 6 steel rollers are powered transmission. This combines with high quality conveyor belt to achieve cutting accuracy within ±0.025 mm

Stable Conveyor Table

The conveyor table is supported by 4 precision screws to ensure high stability during machining

Variable Feed Speed

The conveyor belt speed is controlled by a frequency inverter, permitting variable speed change, which makes the machine suitable for cutting various wood materials, such as soft and hard wood, moisturized and oily wood, etc

High Performance Control Circuit

We use only the world-famous electronic parts in the control cabinet, that assure the best control performance and long service life

MODEL	P-62
Motor of main shaft	15 HP
Motor of feeding	2 HP
Minimum thickness of cut	≥ 2.0 mm
Maximum thickness of cut	120 mm
Maximum width of cut	610 mm
Motor of elevator	0.2 HP
Net weight	1600 Kg
Minimum length of cut	300 mm
Rotation speed of main shaft	1800 - 5600 rpm
Speed of feeding	7 - 21 m/min