MRS-175 – Multiple Rip Saw

MRS-175 has a massive cast iron base, composing the majority of total machine weight of 3000 kgs. This design provides incredible absorption characteristics under deep cutting, especially while performing thick lumber ripping with a multi-blade set up.
Precision chain and rails (dip chain) system facilitates accurate cutting operations.

125 HP Extra Powerful Drive

Thickness of Cut up to 175 mm.

Ruggedly Constructed Throughout for Maximum Rigidity and Stability

Specially designed auxiliary powered outfeed roller assures maximum smoothness of workpiece outfeed especially when working on extra thick, heavy and moist wood.

Download Catalog KuangYung MRS-175 disini

MRS-175 Multiple Rip Saws Outstanding Features

DIGITALLY-CONTROLLED LUBRICATOR FOR FEED CHAIN
The central lubrication system ensures a permanent oil film between the chain and the guide rails. It varies the oil volume according to the cutting requirements of various kinds of wood. If there is insufficient oil in the oil tank, the warning lamp lights up, and the feed chain stops running automatically. This fully ensures the service life of the feed chain and precision rails.

ELECTRICAL AMPERAGE DISPLAY

An overload protection of the saw motor. If the load of the saw motor exceeds the rated amperes, the link chain slows down automatically. This prevents the stock push from damaging the saw arbor or damaging the sawblade. Prolongs the life of sawblade by up to 10-20%.
The variable feeding speed is inverter controlled with frequency motor and easily adjusted by the control panel.

MIST COOLING DEVICE FOR SAWBLADES
The machine is equipped with a mist cooling device, providing cooling and cleaning for sawblades during cutting. This increases smoothness during cutting and extends service life of sawblades.

POWERED SAW ARBOR ELEVATION
The saw arbor elevation is driven by a motor. An independent switch mounted at the outfeed end allows the operator to conveniently check the saw arbor elevating position to avoid sawblades cutting on feed chain pads.

LASER DEVICE (OPTIONAL)
Provides convenient positioning of cut, which reduces material waste to a minimum.

CONVENIENT CHAIN BLOCK REPLACEMENT (OPTIONAL)
Specially designed chain block construction provides convenient replacement of chain block when worn out.

AUXILIARY POWERED OUTFEED ROLLER
The additional powered outfeed end, ensures smooth workpiece outfeed even for thick, heavy and moist wood

Spesifikasi MRS-175

Model	MRS-175
Max. cutting thickness	175 mm
Max. cutting width	350 mm
Distance of fixed inside blade to column	380 mm
Min. Working length	700 mm
Max. sawblade diameter	Ø450 mm (18")
Min. Sawblade diameter	Ø355 mm (14")
Sawblade bore	Ø70 mm
Saw arbor diameter	Ø55 mm
Saw arbor speed	2500 rpm
Saw arbor motor	125 HP
Saw arbor efevation motor	1/2 HP
Feed motor	3 HP (5 HP option)
Variable feed speed (variable speed)	2.5-24 M/min
Powered raise and lower of roller group	1/2 HP
Dust Hood dia.	Ø200 mm
Table height (Pass line)	745 mm
Table area (LxW)	1840 x 790 mm
Overall dimensions (LxWxH)	2425 x 2300 x 1600 mm
Net weight	3000 kgs