SINGLE PASS DRYER
The rotary dryer is widely used for drying the chalk slags, coal powder, slags, clay, and other materials in the building materials, metallurgy, chemical industry, cement industry. The rotary dryer has better adaptability and can dry various materials with a simple and reliable operation.
The Wood chip dryer is mainly composed of the revolving body, lifting plate, driving device, supporting device, sealing ring, and other components. So it has the advantages of reasonable structure, prefect workmanship, high yield, low energy consumption, convenience to operate.
Specification Single Pass Dryer
| Model | LDG-10 | LDG-20 | LDG-30 | LDG-40 | LDG-50 |
|---|---|---|---|---|---|
| Main Machine | |||||
| Drum Dimension | φ1200 x 12000 mm | φ1500 x 12000 mm | φ1600 x 16000 mm | φ1800 x 18000 mm | φ2000 x 20000 mm |
| Insulation | |
||||
| Weight | 6900 kg | 10600 kg | 12300 kg | 16500 kg | 18300 kg |
| Main Drive Power | 5.5 kW | 11 kW | 11 kW | 15 kW | 15 kW |
| Fan (Negative) | 11 kW | 15 kW | 18.5 kW | 30 kW | 30 kW |
| Air Lock | 3 kW x 2 | 3 kW x 2 | 3 kW x 2 | 4 kW x 2 | 4 kW x 2 |
| Speed Reducer Type | 350 | 400 | 400 | 500 | 500 |
| Initial MC | |
||||
| Final MC | |
||||
| Capacity | 500-100 kg/h | 1100-2000 kg/h | 2000-3000 kg/h | 3000-4000 kg/h | 4000-5000 kg/h |
| Cyclone | φ1200 mm | | φ1200 mm x 2 | φ1200 mm x 2 | |
| Cyclone Pipe | φ300 mm | φ300 mm | φ500 mm | φ600 mm | φ600 mm |
| Need Container | | 3 x 40' HC | 4 x 40' HC | 5 x 40' HC | |
| Heat Source - Biomass Burner | |||||
| Temperature | |
||||
| Temperature Control | |
||||
| Available Fuel | |
||||
| Grates | |
||||
| Fuel Moisture | |
||||
| Power | 3 kW | 3 kW | 3 kW | 5.5 kW | 5.5 kW |
TRIPLE PASS DRYER
The working principle of the three-return dryer.
The three-return dryer is composed of three layers of inner and outer cylinders. The wet material enters from one end of the inner cylinder. Inside the dryer, the wet material goes from the inner cylinder to the middle cylinder, and after drying from the middle cylinder to the outer cylinder, the dry material enters from outer cylinder.
Low Price :
Compared with the single-cylinder dryer, the floor area is reduced by about 50%, the civil construction investment is reduced by about 50%, and the power consumption is reduce by 60%.
Multiple Combinations :
A variety of circumferential lifting materials are combined and distributed, which can effectively control the drying time and achieve good drying effect
Thermal Efficiency :
The thermal efficiency of the self-insulation of the cylinder is as high as more than 70% (the thermal efficiency of the traditional single-cylinder dryer is only 35%), and the thermal efficiency is improved by more than 50%
Specification Triple Pass Dryer
| Model | LDSG10 | LDSG20 | LDSG30 | LDSG40 | LDSG50 | LDSG60 |
|---|---|---|---|---|---|---|
| Feed Screw Conveyor | 3 kW | 3 kW | 3 kW | 3 kW | 4 kW | 4 kW |
| Feed Klin Head | |
|||||
| Dryer Main | Ø2000 x 5840 mm | Ø2300 x 7340 mm | Ø2400 x 10460 mm | Ø2800 x 10460 mm | Ø2950 x 12420 mm | Ø3300 x 12420 mm |
| Tug, Bearing, Shaft | |
|||||
| Support Ring, Fixed Support | |
|||||
| Roller Bracket | |
|||||
| Flange, Support | |
|||||
| Speed Motor | 4 x 2 = 8 kW | 5.5 x 2 = 11 kW | 4 x 4 = 16 kW | 4 x 4 = 16 kW | 5.5 x 4 = 22 kW | 5.5 x 4 = 22 kW |
| Discharge Klin Tail | |
|||||
| Capacity | 1 T/H | 2 T/H | 3 T/H | 4 T/H | 5 T/H | 6 T/H |
| Theoritical Water Evaporation | 700 kg/h | 1400 kg/h | 2100 kg/h | 2800 kg/h | 3500 kg/h | 4200 kg/h |
| Fan | 15 kW | 22 kW | 45 kW | 55 kW | 75 kW | 90 kW |
| Cyclone | |
|||||
| Dust Collector Silo | |
|||||
| Air Lock | 2 x 3 = 6 kW | 2 x 3 = 6 kW | 2 x 3 = 6 kW | 2 x 3 = 6 kW | 4 x 2 = 8 kW | 4 x 2 = 8 kW |
| Wind Pipes | |
|||||
| Electric Cabinet | |
|||||