3 set working table
1 set outside stacker
1 set lift
Core veneer adjuster: Yes
Finished core lateral move: Yes
Speed adjustable: Yes
Finished core counter: Yes
Specification L-Type (Panel) Core Composer
| Model | L-Type (Panel) Core Composer |
|---|---|
| Drive type | SERVO |
| Structure | Whole steel plate laser cutting |
| Transfer speed | 0 - 35 m/minute (adjutable) |
| Working efficiency | 180 - 200 pcs/h (finished jointing veneer) |
| Covered area | 100 m2 |
| Transverse jointing part (L x W x H) | 4000 x 2600 x 2500 mm |
| Vertical jointing part (L x W x H) | 5000 x 2600 x 2500 mm |
| Stacker part (L x W x H) | 4000 x 2200 x 2300 mm |
| Total weight | 9200 kg |
| PLC | Taiwan Delta PLC |
| Drive type | INVT Servo 3 km x 4, 1.5 kW. 1 |
| Transverse jointing edge knife | Guomao motor 1.5 kW + Taiwan Chain Tail Clucth brake |
| Transverse jointing fixed length knife | Guomao motor 1.5 kW + Taiwan Chain Tail Clucth brake |
| Vertical jointing convey motor | Vertical jointing convey motor 1.5 kW |
| Transverse jointing reducer | Ruili reducer x 2 |
| Transverse jointing glue groove heat | 9 kW |
| Vertical joiting convey motor | Guomao motor 1.5 kW |
| Vertical jointing fixed length knife motor | Guomao motor 2.2 kW |
| Vertical jointing glue groove heat | 9 kW |
| Stacker up and down motor | Guomao motor 3 kW |
| Stacker upper convey motor | Guomao motor 1.5 kW |
| Stacker bottom convey motor | Guomao motor 1.1 kW |
| Stacker outside convey motor | Guomao motor 1.1 kW |
| Lift motor | 3 kW |
| AC | 700 W x 2 |
| Total power | 50.8 kW |