
Fully Auto Finger Jointing Line
An extra value in performance and price
If you need to increase productivity and quality in fully jointing operations, you can consider the FL-18 Auto Finger Jointing Line from CKM. The entire machining procedures from workpiece in-feed, left and right shaping to jointing is fast, smooth and accurate. The whole production line is carefully designed and built for maximum dependability year after year.
Capacity 4-5 sticks/min
Production Flow Chart

- Automatic initial in-feeding of workpiece.
- Automatic feeding table.
- F-C07 left finger shaper performs scoring, trimming and shaping on left end of workpiece.
- Worpieces automatically travel into right finger shaper.
- F-C08 right finger shaper performs scoring, trimming, shaping and gluing on right end of workpiece.
- Workpieces feed to conveyor table automatically.
- Workpieces feed to Automatic Feeding Table as a package.
- Workpieces feed one by one to short pre-press assemble stand automatically.
- Workpieces travel forward for cutting to length.
- Finger assembly is performed by a powerfull hydraulic system.
- Final product out-feed on staged platform.
F-C07 Finger Shaper (Left End)


Left Shaping Mechanism
The mechanism performs scoring, trimming and shaping operations on the right end of the workpiece. Scoring blade in front of trimming blade cuts bottom edge to give splinter-free finish. Finger cutters produce smooth finger shape. Cutting capacity: 6 ¼” thickness.
F-C08 Finger Shaper (Right End)


Right Shaping Mechanism
The mechanism performs scoring, trimming, shaping and gluing operations on the left end of the workpieces. Scoring blades cut top and bottom edges

Roller-Type Glue Coating Device (standard)

Glue Spraying Device (optional)
With this device, glue can be uniformly sprayed on the surface of finger joints during feeding. It also features easy cleaning and maintenance.
F-I29 Independent Initial Conveyor Table
F-D01-12 Automatic Feeding Table
F-I29 Independent Initial Conveyor Table
The specially designed initial conveyor tables are a combination of independent tables. This design permits customers to increase or reduce the quantity of conveyor table as desired.
F-D01-12 Automatic Feeding Table (Automatic wood turn-over)
- Located in front of pre-press assemble stand, this automatic feeding table allows workpiece to feed on by one, eliminating operator’s efforts.
- The wood turn over from vertical to horizontal before entering into the finger assembler.
F-A08 Assembly Press

- For jointing lengths over 6.2 meters; the assembly press is designed with two hydraulic cylinders, providing more powerful and faster jointing performance.
- For jointing lengths under 6.2 meters; only a single hydraulic cylinder is equipped.
- Standard jointing lengths can be specified.
- Length of cut is calculated by an encoder.
- A synchronized 2-step process allows the back of the press to continue jointing and cutting to length while the front of the press is performing pressing and out-feeding motions.
Pneumatically Loaded Feed Rollers
The feed rollers on the assembly press are loaded by air cylinders to achieve smooth and stable feeding at all times.
Accurate Length Setting Via Touch Screen Panel
Length of cut is calculated by an encoder and set on a touch screen for increased accuracy.
Spesifikasi FL-18
F-I29 Multi-stage Initial Conveyor Table | |
---|---|
Conveyor table width | 650 mm |
Table height | 875 mm |
Feed drive motor | 1/2 HP |
Overall length | 990 mm |
Overall width | 840 mm |
*Additional units to expand the system are available upon request.
F-D01-12 Auto Feeding Table | |
---|---|
Auto feeding table | 650 mm |
Range of material length | 150 - 1000 mm |
Range of material width | 30 - 160 mm |
Power Required | |
Servo motor | 400 W |
Feed drive motor | 1 HP |
Outfeed drive motor | 2 HP |
Brush wheel drive motor | ⅛ HP |
Machine dimensions (L x H x W) | 2940 x 1560 x 2590 mm |
F-C07 Auto Finger Shaper (Left End) | |
---|---|
Max. available width working table | 650 mm |
Range of workpiece length | 150 - 1000 mm |
Range of workpiece height | 20 - 160 mm |
Table moving speed | 3 - 4 carts/min |
Trimming saw speed | 2800 rpm (50 hz) 3400 rpm (60 hz) |
Finger cutter speed | 5000 rpm |
Scoring saw speed | 2800 rpm (50 hz) 3400 rpm (60 hz) |
Power Required | |
Table-drive motor | 2 HP |
For conveyor motor | ½ HP |
Scoring saw motor | 2 HP |
Trim saw motor | 5 HP |
Shaper cutter motor | 20 HP |
Diameter of cutter (in/out) | Ø 70 / Ø 160 mm |
Dust hood outlet diameter | 6" x 1, 4" x 1 |
Machine dimension (L x H x W) | 2860 x 1390 x 1980 mm |
Noise value | 88.2 Db |
F-C08 Auto Finger Shaper (Right End) | |
---|---|
Max. available width working table | 650 mm |
Range of workpiece length | 150 - 1000 mm |
Range of workpiece height | 20 - 160 mm |
Table moving speed | 3 - 4 carts/min |
Trimming saw speed | 2800 rpm (50 hz) 3400 rpm (60 hz) |
Finger cutter speed | 5000 rpm |
Scoring saw speed | 2800 rpm (50 hz) 3400 rpm (60 hz) |
Power Required | |
Table-drive motor | 2 HP |
For conveyor motor | ½ HP |
Scoring saw motor | 2 HP x 2 |
Trim saw motor | 5 HP |
Shaper cutter motor | 20 HP |
Diameter of cutter (in/out) | Ø 70 / Ø 160 mm |
Dust hood outlet diameter | 6" x 1, 4" x 1 |
Machine dimension (L x H x W) | 3270 x 1680 x 1980 mm |
Noise value | 88.2 Db |
*1: The standard gluing device is roller type, the tenon depth is 12 mm.
2: Inject type gluing system can be installed upon request.
F-A08 Assembly Press | |
---|---|
Available length of product | 6200 mm (4500 mm) |
Available thickness of product | 20 - 60 mm |
Available width of product | 30 - 160 mm |
Feeding speed | 80 m/min |
Vertical joint capacity (30 x 60 x 400 mm) | 24 m/min |
Horizontal joint capacity (30 x 60 x 400 mm) | 12 m/min |
Power Required | |
Feed motor | 3 HP / 2 HP |
Max. assembly pressure | 0 - 150 Kg/cm² |
Hydraulic power unit | 5 HP |
Cut-off saw | 5 HP |
Dust hood outlet diameter | 4" (101.6 mm) |
Machine dimensions (L x H x W) | 8610 x 1465 x 1545 mm |
Noise Value | 84 Db |
Pengguna lain juga melihat mesin Finger Jointing Line berikut:
FJ-15 Advance Manual Finger Jointing System
FJ-15 Advance Manual Finger Jointing System ensures precise finger jointing, offering flexibility in manual operation and delivering strong, durable connections.
FL-10A Auto Finger Jointing Line
FL-10A Auto Finger Jointing Line offers a fully automated solution for high-precision wood jointing, supporting production efficiency & boosting structural strength.
Butuh Bantuan?
Hubungi kami untuk bantuan mengenai spare parts, service dan penawaran pisau mesin. Kami berikan solusi terbaik.
Lokasi Cabang
Temukan lokasi cabang kami yang terdekat dengan kota Anda. Kami siap membantu informasi mengenai mesin perkayuan.
Hubungi Kami
Anda butuh informasi lebih lanjut mengenai mesin kayu yang tersedia? Kami terjangkau melalui telepon dan Whatsapp.