Surabaya: +6281231169074 | Jakarta: +6287818188118

Eclipse - Edge Banding Series

CHARACTERISTICS SEMI AUTOMATIC CONTOUR EDGE BANDER – For shaped “concave and convex “ panels 10-60 mm tichness and 1-3 mm band thickness GLUEING STATION with: – Glue and tape application on big and small shaped panels – Equipped with glue pot with 1 Kg capacity – 2 rollers to copy the shape of the piece – Glue application amount is adjusted via a knob – Set up of the glue temperature – Automatic guillotine for coiled material up to 3 mm x 45 mm – PLC to set the lenght and the cut of the tape (by means of an encoder) for open and closed pieces;

Anda dapat melihat proses kerja mesin Eclipse Edge Banding Series pada video disamping.

  • Trimming Operation
  • Execution of small piece
  • Edge banding & Trimming operation secara bersamaan
  • Trimming station with pneumatic tilting
  • Execution of big piece

Eclipse Edge Banding Characteristic

GLUEING STATION with:

  • Glue and tape application on big and small shaped panels
  • Equipped with glue pot with 1 Kg capacity
  • 2 rollers to copy the shape of the piece
  • Glue application amount is adjusted via a knob
  • Set up of the glue temperature
  • Automatic guillotine for coiled material up to 3 mm x 45 mm
  • PLC to set the length and the cut of the tape (by means of an encoder) for open and closed pieces;

LASER TO MAKE AN EASY PROGRAMMATION OF THE CUT FOR CLOSED PIECES WITH NO NEED OF MEASURING THE PIECE

  • On/off automatic feeder of the panel
  • Raisable working table for small panels
  • Utilizes 2 x 800 w heating elements with electronic temperature control via thermoregulator
  • On/off automatic feeder of the panel
  • on/off trimming unit
  • 2 rollers to copy the shape of the piece

TRIMMING STATION WITH PNEUMATIC TILTING, TO ALLOW EDGE BANDING OF BIG PIECES:

  • Trimming unit with 2 motors 0,5 Kw high frequency 15000RPM with up/down and front copiers and manual lever to lift the motors approaching the pieces to be trimmed
  • on/off trimming unit
  • 2 brazed cutters R=3, Z=6
  • Raisable working table for small panels
  • Turning table unit for large panels
  • Holding arm with vacum table to hold the big panels for edging and trimming
  • Dimensions: 2100 x 1600 x 1600 mm • Kg 600
  • CE standards