Cutmate D Series
Double Knife Veneer Guillotine
Recommended Option
Second Cut Technology
Cutmate D Series Movements
A. The working table is moved forwards and backwards by a servo motor with three sets of linear guides and two sets of ballscrews.
B. The laser line (B1) indicates where the rear knife will cut in the initial position, while the laser line (B2) is movable according to the wanted veneer cutting width. (option)
C. The pack beam is moving up and down clamping the veneers are straightened out while cutting.
D. The front knife is mounted on the pack beam and cuts from the top agains the working table
E. The rear knife is mounted on the rear of the table and cuts upwards agains the pack beam.
F. The rear fence is used for the adjustment of the veneer bundle when placing the veneers on the working table.
Specification Double Knife Veneer Guillotine
| Model | Cutmate 2800D | Cutmate 3400D | Cutmate 4000D |
|---|---|---|---|
| Cutting length | 2800 mm | 3400 mm | 4000 mm |
| Daylight opening | 80 mm | 80 mm | 80 mm |
| Electric power | Approx. 11 kW | Approx. 11 kW | Approx. 11 kW |
| Cutting width | 30 - 470 mm | 30 - 470 mm | 30 - 470 mm |
| Dimension of guillotine | 4500 x 2300 x 2000 mm | 5100 x 2300 x 2000 mm | 5700 x 2300 x 2100 mm |
| Dimension of hydraulic tank | 1150 x 550 x 1100 mm | 1150 x 550 x 1100 mm | 1150 x 550 x 1100 mm |
| Net weight with hydraulic tank | Approx. 7280 kg | Approx. 8080 kg | Approx. 9080 kg |