Clamp Carrier

Machine Feature:
Clamp carrier machine is suitable to produce the solid wood laminating, particle board laminating and compound floor laminating. Such as: furniture, doors, windows, cabinet, table top, bed pillars, floorboards and constructional material… etc.

R2-IFH-20850-2600-2O – Manipulator Clamp Carrier

R2-IF-201250-3600-2O2 – Clamp Carrier

Manipulator device there are 4 pieces of air cylinder for each manipulator to do up press, more flat, reduce beat the board and increase efficiency.

The hydraulic clamp carrier, the tightener device is used hydraulic motor to drive tighten socket which has stable tighten feature. The tightened pressure can adjust according to thickness of work pieces.

R2-IF-20844-2600-1A1 – Clamp Carrier

R2-IF-06844-2600-1A1 – Clamp Carrier

The pneumatic clamp carrier, the tightener is a standard device for all clamp carriers, has fast, low noise, long using lift and an minimum trouble air wrench.

Panel flattener device to ensure that the work piece can maintain in the flatness when tightened clamps. Number of panel flattener device, it can increase depend on customer request.

Customer can also choose:

Manual hydraulic tightened / fully auto loosen device – upper section use fully auto loosen clamps, bottom section use manual hydraulic motor to tightened clamps. It can save a lot of time and improve productivity

Assisted pressing bar (Anti-warp bar), which can pressing and laminating the wood block at the sametime and also can avoid wood board to become warped and make the products flat.

Heavy-duty worm gear reducer to ensure the transmission quality of the machinery, and even in the state of unbalanced load rotation the caterpillar chain for rotation feeding is stable.

Option Device Description

IFFA
Fully Automatic Mode – IFFA
Hydraulic tightened / loosen semi-auto move forward and backward device use cross switch to control tightened / loosen hydraulic motor, operation for convenient and quick and it can save a lot of time and improve productivity.

Auto tightened / loosen device – upper section loosen clamps, bottom section tightened clamps. It can save a lot of time and improve productivity.
HMI operating mode, you can set the tightening sequence and the pressure and manual and automatic modes of operation.

IF : Clamp carrier
IFH : Manipulator clamp carrier
IFD : Double transmission
IFSA : Manual tightened, auto loosen, semi auto clamp carrier
IFFA : Auto tightened and loosen, fully auto clamp carrier

1A1 : 1 set of pneumatic tightener, 1 set of panel flattener
2A2 : 2 sets of pneumatic tightener, 2 sets of panel flattener
1O1 : 1 set of hydraulic tightener, 1 set of panel flattener
2O2 : 2 sets of hydraulic tightener, 2 sets of panel flattener

Spesifikasi Clamp Carrier

Height (m/m)	Clamp depth	30" (762mm)	38" (965mm)	44" (1117mm)	50" (1270mm)	52" (1320mm)
	Total height (6 sections)	2800	3200	3500	3800	3900
	Total height (8 sections)	3100	3500	3800	4100	4200
	Total height (over 8 sections)	2800	3210	3520	3820	3920
Length (m/m)	6 sections	2600	3000	3300	3600	3700
	8 sections	2900	3300	3600	3900	4000
	12 sections	3100	3500	3800	4100	4200
	16 sections	3500	3900	4200	4500	4600
	20 sections	4100	4500	4800	5100	5200
	30 sections	5300	5700	6000	6300	6400
	40 sections	6200	6600	6900	7200	7300
Width (m/m)	Machine max. working width	100" (2600mm)	120" (3000mm)	150" (3800mm)	180" (4500mm)	200" (5000mm)
	Pneumatic total width	3700	4350	4970	5750	6250
	Hydraulic total width	4300	4950	5570	6350	6850

Special specifications can be designed and manufactured upon request
The specification of our products are subject to change without notice in advice. Catalogue diagrams and instructions have no contractual basis.

