
EB – 400
Veneer Infeed > Coil Cut-off > Gluing and Press > End Cutting > Fine Trimming > Buffing
These automatic edge banding machines accommodate coiled veneer, striped veneer, 3 mm edge strip and wood strip. Each machine is constructed of various working mechanismc, providing maximum flexibility of operation. The unit employs two lines of continous pressure wheels and high tensile link chain conveyor for extremely smooth feeding performance. these quality proven automatic edge banding machines integrate many fine features such as maximum dependability, high efficiency, high banding quality, and minimum trouble.

EB – 500
Veneer Infeed > Coil Cut-off > Gluing and Press > End Cutting > End Trimming > Fine trimming > Scraping > Buffing

EB – 750C
Veneer Infeed > Coil Cut-off > Gluing and Press > End Cutting > End Trimming > Fine Trimming > Top Profile Trimming > Scoring Saw > Scraping > Buffing

These table provides various basic working mechanism combination for reference. For model over EB-450 custom combination of working mechanisms are available to meet specific customer requirements. Various optional equipment may be integrated with the working mechanisms.
Basic Working Mechanisms

Gluing Unit 3001
Employs 2.4 KW heater with 4 kgs tank capacity. Glue heating can be quickly accomplished in 25 minutes. Glue tank is easy to be removed, for convenient cleaning and maintenance

Infeed Unit 3001
Features maximum stability when feeding coiled or striped veneer. Easy to change over and adjust.

Pressing Unit 3101
It consist of 4 pressure rollers with upward and downward tilting function. Correct pressure is achieved through adjustment on air system and screw, ensuring superior tightness of pressing.

Tilting End Cutting Unit 3203
The cutting unit features double tilting spindles. The mechanism can be tilted up to 20⁰ for chamfering and cutting. Two motors can be adjusted individually to perform front and rear end cutting operations.

Single Side Top and Bottom Trimming unit 3301
Suitable for rough trimming and over 3 mm surface smoothing for wood strips. this rough trimming unit is often used together with top and bottom fine trimming unit. Motor and trimming cutter are easy to remove.

Double Side Top and Bottom Trimming Unit 3303
The motor can be tilted 0⁰ – 25⁰ to suit various types of veneer . The system can perform R2 – R5 radius trimming operation. Motor and trimming cutter are easy to remove

Top Profile Trimming Unit 3503 – 1
The trimming unit is suitable for single side trimming for knock down furniture and kitchen cabinet, doors, etc. Two motors are adjusted individually.

Bottom Profile Trimming Unit 3503 – 1
The unit has the same function as the top profile trimming system. It is often used together with top profile trimming unit top perform trimming operations on the 3rd and 4th surface for thick PVC. Also suitable for double profile trimming operations.

Scraping Unit 3501
The unit is used for eliminating the cutting mark on PVC edges, or eliminating glue dust. Equipped with air blowing device for blowing off waste glue dust.

Top and Bottom Buffing Unit 3505
The buffing wheel can be tilted 0⁰ – 45⁰ vertically and 15⁰ laterally. The unit is suitable for removing glue dust and creating a smooth PVC edge. When requested, # 3505 buffing wheels are available for uniform usage.

Scoring Saw Unit 3401
When the scoring saw protrudes over the conveyor, the specially designed guide wheel helps to achieve straight and constant depth of groove
Optional Accessories

PROFILE BUFFING UNIT 3506
Equipped with specially designed tracing device. The profile buffing unit is often used together with top and bottom trimming unit. It is suitable for completely removing glue dust from profile, and creates an added buffing effect

OSCILATING SANDING UNIT 3508
The cam drive sanding belt oscillation sands the edging material with ease, and allows for complete utilization of the entire sanding belt. the unit is especially ideal for fine sanding on wood veneer

ROCKER ARM TYPE END CUTTING UNIT 3201
The rocker arm motion is operated by a pneumatic device. The unit performs front and rear cutting motions. Also, it can perform end chamfering by using a chamfering sawblade. Specially designed mechanism providing 20 – 25 m/min end cutting speed

HOT AIR BLOWER
In case 3 mm PVC or ABS material is applied for edge anding, the hot air blower will maintain the original color of the banding material.

SIDE – SHAPING UNIT 3402
This side – shaping unit is to shape the side of a workpiece roughly cut by panel saw, that may have the side of workpiece smooth and straight without tearing before edges banding
Spesifikasi Automatic Edge Banding Machine
SPECIFICATIONS | |
---|---|
Workpiece length | 160 - up |
Workpiece width | 65 - up |
Workpiece thickness | 10 - 60 |
Edging thickness | 0.4 - 6 / (13) |
Feed speed | 6-25 m/min |
Air pressure required | 6 kg/cm² |
MODEL | EB-350 | EB-400 | EB-450 | EB-500 |
---|---|---|---|---|
Feed power | 1.5 kw | 1.5 kw | 2.3 kw | 2.3 kw |
Total horsepower | 7 kw (9.5 hp) | 8 kw (10.5 hp) | 8.5 kw (11.5 hp) | 11 kw (15 hp) |
Net weight | 1,230 kgs | 1,390 kgs | 1,570 kgs | 1,700 kgs |
Gross weight | 1,530 kgs | 1,740 kgs | 1,970 kgs | 2,150 kgs |
Machine dimensions | 3,700x1,800x1,450 | 4,220x1,800x1,450 | 4,650x1,800x1,450 | 5,200x1,800x1,450 |
Packing dimensions | 3,570x920x1,500 | 4,100x920x1,500 | 4,520x920x1,500 | 5,150x920x1,500 |
MODEL | EB-580 | EB-660 | EB-750 | EB-940 |
---|---|---|---|---|
Feed power | 3.8 kw | 3.8 kw | 4.0 kw | 5.6 kw |
Total horsepower | 13.5 kw (18 hp) | 14.5 kw (19.5 hp) | 18 kw (24 hp) | 24 kw (32 hp) |
Net weight | 2,170 kgs | 2,600 kgs | 3,000 kgs | 3,500 kgs |
Gross weight | 2,670 kgs | 3,200 kgs | 3,750 kgs | 4,250 kgs |
Machine dimensions | 6,100x1,800x1,450 | 6,800x1,800x1,450 | 7,700x1,800x1,450 | 9,400x1,800,1x850 |
Packing dimensions | 6,000x920x1,500 | 6,670x920x1,500 | 7,570x920x1,500 | 9,300x920x2,000 |
End cutting unit | Power | 0.67 HP x 2 |
RPM | 12000 |
|
Cutter | 120 x 20 x 2.6 |
|
Flush trimming unit | Power | 1 HP x 2 (2 HP x 2) |
RPM | 12000 |
|
Cutter | 70 x 16 x 14.3 |
|
Fine trimming unit | Power | 1 HP x 2 (0.67 HP x 2) |
RPM | 12,000 (18,000) |
|
Cutter | 70 x 16 x 14.3 (or 73 x 16 x 16 R2-R5) |
|
Top profile trimming unit | Power | 0.5 HP x 2 |
RPM | 12,000 (18,000) |
|
Cutter | 73 x 16 x 16 (R2-R5) |
|
Bottom profile trimming unit | Power | 0.5 HP x 2 |
RPM | 12,000 (18,000) |
|
Cutter | 73 x 16 x 16 (R2-R5) |
|
Scraping | Cutter | 12 x 20 x 2 (R2-R5) |
Buffing unit | Power | 0.5 HP |
RPM | 1720 |
|
Cutter | 150 x 22 x 24 |
|
Scoring saw unit | Power | 4 HP x 1 |
RPM | 7,500-9,000 |
|
Cutter | 175-200 x 25 x 3 (3-8) |
|
Corner buffing unit | Power | 0.5 HP |
RPM | 2780 |
|
Buffing | 150 x 22 x 40 |
|
Edge sander unit | Power | 2 HP |
RPM | 1720 |
|
Sander | 100 x 635 |
|
Side-shaping unit | Power | 4 HP / 5 HP |
RPM | 9,000 / 12,000 |
|
Cutter | 125 x 30 x 28 |
All specifications, designs and characteristics shown on this catalogue are subject to change without prior notice.
Butuh Bantuan?
Hubungi kami untuk bantuan mengenai spare parts, service dan penawaran pisau mesin. Kami berikan solusi terbaik.
Lokasi Cabang
Temukan lokasi cabang kami yang terdekat dengan kota Anda. Kami siap membantu informasi mengenai mesin perkayuan.
Hubungi Kami
Anda butuh informasi lebih lanjut mengenai mesin kayu yang tersedia? Kami terjangkau melalui telepon dan Whatsapp.