NB6IJ – Auto Inclination Edge Banding Machine
- NB6IJ merges numerous functions in one machine, including pre-milling, grooving on tape, feeding, gluing, snipping, end trimming, rough trimming, fine trimming, scraping, flat scraping buffing, edge banding can be executed on one machine.
- Edge banding on the panel edge with a degree of 0-60, suitable for bevel and straight edge.
- Ideal for almost all kinds of edging material: PVC, ABS, thin plastic and some other materials.
- simplified operation interface for operating machine in shortest time.
- Professional safety protection device is domestic initiative.
Partially inclined edge
Mechanical and body structure
- Heavy-duty machine structure with conveying chain to feed panels;
- Cutting groove on tape for nice banding;
- Dust hoods at different functional units
- Buffing unit with dual screen cloth structure to polish the top and bottom edges without any scratches on panel surface.
- Driven by continuous current dynamo, more stably
- The up and down of the beam is electric controlled for accurate positioning with digital meter
Additional press units
- This machine is equipped with additional press unit to Make sure edge banding stick well all the time.
- Interval feeding detection system designed for controlling processing distance to enhance productivity.
- Sheet rubber for protecting staff from hurting hands while placing panels on the guiding rail.
- Panel support frame with guiding rollers makes large panels be transmitted smoothly.
- Handle for adjusting left and right of guiding plate.
- Scram button is designed to stop running at once, guarantee operator life safety.
- Equipped with braking system prevents any possible accidents and ensures safe operation of operators, automatic monitoring abnormal operation.
- The wear proof conveying piece coupled with miter pinch rollers to ensure panels transmitted smoothly.
- The abrasive resistance of accurate semicircle guide rail is improved based on hardening treatment.
- The conveying electrical machine makes variable frequency starting possible, very stable
- The speed of conveyor belt can be adjusted in sectional type, 10 m/min, 12 m/min
Inclination angle adjustment
Angle adjustment: Φ=0~60°;
- panel thickness: H=15~18 mm,
- angle adjustment: Φ=0~60°
- required: V=8~10 mm;
- panel thickness: H=20~30 mm,
- angle adjustment: Φ=0~45°
- required: V=8~20 mm;
- panel thickness: H=30~40 mm,
- angle adjustment: Φ=0~45°
- required: V=20~30 mm;
- required V=0 mm; C=15~25mm,
- angle adjustment: Φ=0~9°
- edge banding in vertical : Φ= 0°
- panel thickness: H=15~40mm.
- Glue belt feeding device with the knurled pin wheel structure, can greatly increase the friction, making edge tape feeding more smoothly
- Traditional way of adding glue is stable, Teflon coated glue pot designed for EVA hot-melt glue with a high capacity.(about 5L)
- Used to clear excess edge and glue on panel surface.
- Equipped with electric pneumatic controlled blowing air device.
- Cutting device: Automatic cutting off remaining scraps.
- To press edge tape on panel surface firmly. (i.e. for inclination surface and vertical surface).
- Pressure rollers are suitable for pressuring edge tapes in different thickness on panel surface;
- Edge tapes in different thickness can be adjusted manually so as to achieve the best edge banding effect.
- Spraying device for release agent; (in front of pre-milling unit)
- Spraying device for cleaning agent; (in front of buffering unit)
- To make sure nice and clean finishing surface.
Rough trimming unit
- Rough trimming unit with 2 powerful motors (power 1.1kw; frequency 200hz; rotating speed 1,2000rpm/min) is used to trim out upper lower excess edge;
- The angle of electric machine is adjustable by manual operation, 0 to 5 degrees;
- Processed with 2 milling cutters;
- Independent dust extraction
End trimming unit
- Dual linear guide way structure at an angle of 45 degrees;
- 2 motors with power of 0.37kw, frequency of 200hz, rotating speed of 12000rmp/min;
- 2 saw webs has a specification of 115*2.6*22*24Z;
- Equipped with independent dust extraction.
- Quick and precise due to the linear rail and high speed motors.
Fine trimming unit
- Using 2 motors (power: 0.55 kw; frequency: Hz, rotating speed: 12000 rpm/min).
- Electric machine with adjustable angle
- 2 fine trimming milling cutters (circular arc radius: R2); Choice of radius R cutters, cutter adjustable with numerical indicators
- Independent dust extraction.
- Scraping the edge by R2 cutters, making edge banding more beautiful.
- Equipped with digital display meter for adjusting and resetting rapidly.
- Designed to grease machine components so as to prevent machine components from aging, save maintenance costs, save labour.
Operation indicating light
- Adopted imported Germany operation indicating light.
- The operation status of the machine is available at a glance.
- Cleaning brush
- Blow air cleaning system keeping cleaning during the course of processing.
- All suction hoods are fully covered, each unit equipped with an independent suction hood.
–Pre-milling at bevel surface *1
–Rough trimming *1
–Fine trimming *1
- Halt switch for debugging and adjusting machine.
- Main switch for controlling machine operation.
- 360°dust cover prevents burr and dust to offer longer service life, save labor and possible costs of maintenance.
- Honeycomb sponge layer on dust cover surface designed for reducing noise.
- Adopted 7’’ touch screen. Operation interface is intuitive and simple, available to control each component independently and generate statement accordingly.
- Maximums operation convenience, training period can be effectively reduced so as to save labor cost.
- System languages: English, and Chinese
- Most of electric components of the machine are good brands for high quality and available from many local markets.
- PLC controlled system.
Edge Banding Direction
|Min. panel size||
|Edge tape thickness||
Butuh info lebih lanjut? Hubungi 031-3531718
Mesin-mesin lain dari PT. Alpha Utama Mandiri