Nanxing

NB6CJ – Auto Edge Banding Machine

Optional: NB6HJ

NB6CJ - Auto Edge Banding Machine

Edge Banding Direction

Edge Banding Direction

Basic function

  • Single side straight line edge banding machine, suitable for PVC, ABS, acrylic edge tape.
  • One processing cycle to finish edge banding and follow-up processing.

Basic structure

  • Trimming and snipping unit with 2 spindles.
  • Processing unit equipped with suction hood.
  • Pressure feeding device: pressing panels with miter pinch rollers, The up and down of the beam is electric controlled, and positioning information can be shown numerically;
  • Conveyor chain: the conveyor chain is leaded by semicircle guide rail;
  • The part of Pressure feeding and engine base connected to control cabinet via stand column. Such bridge frame is able to bear the pressure of beam and panels. Feed screw nut as kind of drive has a combine precision of 7H/7g;
Engine base

Engine base

  • The steel plate is cut by laser and made via welding just one time. In the meantime, utilizing natural aging to relieve the internal stress of the engine base.
  • The support frame of panels coupled with roller guide so as to pull the panels about 600mm in width.
Conveyor

Conveyor

  • the conveying piece is wearproof.
  • the abrasive resistance of accurate semicircle guide rail is improved based on hardening treatment
  • the conveying electrical machine makes variable frequency starting possible, very stable and equipped with braking system;
Pressure feeding device

Pressure feeding device

  • Pressing panels with miter pinch rollers,
  • Aluminum pressure beam provides high precision and excellent stiffness.
  • The up and down of the beam is electric controlled and driven by asynchronous, encoder of this device offers the feedback which guarantees high accuracy of positioning.
  • Positioning information is numerically available at a glance.
Safety device

Safety device

  • All of facilities we use confirm to relevant national standard.
  • Air cylinder for fixed distance between plates in order to ensure normal operation of every component.
  • If the panel thickness over the current seal plate, the conveyor belt can stop automatic due to the powerful safeguard.
Glue pot

Glue pot

  • Teflon coated glue pot, designed for EVA hot-melt glue.
Pressure rollers

Pressure rollers

  • One pre-pressure roller and four post rollers allow edge tape firmly to be pressed on surface of panels.
  • Pressure regulating valve for adjusting air pressure, 1.5~2.5 bar.
End trimming unit
End trimming unit

End trimming unit

  • Linear guide way structure at an angle of 45 degrees;
  • 2 motors with power of 0.37 kw, frequency of 200 hz, rotating speed of 12000 rpm/min;
  • The motor with manual rotating device for angle adjustment;
  • 2 saw webs has a specification of 115*2.6*22*24Z;
  • Lubrication system;
  • Equipped with independent protective cover.
Rough trimming unit
Fine trimming unit
Fine trimming unit

Rough trimming unit

  • Rough trimming unit with 2 powerful motors (power 0.75 kw; frequency 200 hz; rotating speed 1,2000 rpm/min) is used to trim out upper and lower excess edge;
  • The angle of electric machine is adjustable by manual operation, 0 to 5 degrees;
  • Processed with 2 milling cutters;
  • Separate suction hood.

Fine trimming unit

  • Using 2 motors (power: 0.5 kw; frequency: 200 hz, rotating speed: 12000 rpm/min).
  • Electric machine with adjustable angle
  • 2 fine trimming milling cutters (circular arc radius: R2);
  • Independent suction hood.
Corner trimming unit

Corner trimming unit

  • Double side circular bead is achieved;
  • Double motors of corner trimming unit; Power: 0.3 kw*2; Frequency: 200 Hz; Rotating speed: 12000 rpm/min
  • Planar linkage;
  • Two profiling mill cutter R2 3Z;
  • Equipped with separate suction hood.
Scraping unit
Scraping unit
Buffing unit

Scraping unit

  • To scrap the edge by cutters with a circular arc radius of R2.
  • Processed with electric pneumatic blowing device.

Buffing unit

  • To polish the upper and lower edges.
  • Clean the excess glue of panel edge.
Electric equipment

Electric equipment

  • Input voltage, 3-380v, 50hz;
  • Frequency converter with motor braking function;
  • Phase sequence protector
  • All the electric equipments of facilities confirm to relevant national standard
  • Permitting to be operated under the temperature of 0-40℃.
Control system

Control system

  • The operation interface with touch screen is intuitive and simple; information on the machine status is available at a
    glance.
  • System languages: English, simplified Chinese, and traditional Chinese.
  • Each working unit is controlled by independent frequency converter.
  • Most of electric components of the machine adopted international brands for high quality and generality
Model
NB6CJ
NB6HJ
Panel length
≥ 120 mm
≥ 120 mm
Panel width
≥ 80 mm
≥ 80 mm
Min. panel size
120 x 80 mm
120 x 80 mm
Panel thickness
10 - 60 mm
10 - 60 mm
Edge tape thickness
0.4 - 3 mm
0.4 - 3 mm
Feeding speed
16 / 20 / 24 m/min
16 / 20 / 24 m/min
Dust collector
Ф 125 mm x 3
Ф 125 mm x 5
Total power
15.6 kw
18 kw
Overall dimension
6650 x 1450 x 1650 mm
6600 x 1450 x 1650 mm
Net weight
2350 kg
2440 kg

  • Can be right side feeding as option

Butuh info lebih lanjut? Hubungi 031-3531718