Excitech

E4 Nesting with Automatic Pre-Labeling

E4 Nesting (with automatic pre-labeling)

E4 Nesting (with automatic pre-labeling)
  • Top of its range, this solution has great advantage of not requiring the constant presence of an operator. The suction cups equipped on the gantry travels to the rear of the machine to pick up the workpiece from the scissor lift, which is then nested and drilled at the flat table. At the completion of the work cycle, the pusher transports the completed workpiece out of the working area allowing simultaneous loading of the next cycle
  • Features world’s top class components. The enclosure over the gantry with LED light strip for display of the machine status prevents flying out of materials and greatly enhances safety
  • Truly versatile – nesting, routering, vertical drilling and engraving all in one. It is well suited for panel furniture, office furniture, kitchen, cabinets production
E4 Nesting (with automatic pre-labeling) 1

Pre-label the panel with rapid travel axis before nesting and vertical drilling further eliminates operator intervention during work process and renders the whole cycle truly push-button-and-go.

Italian OSAI Control

Italian OSAI Control
Control unit separate from the main electrical cabinet that promises better mobility and safety

E4 Nesting (with automatic pre-labeling) 3

Two sensor-as opposed to commonly-seen one-double insure that panel stack is raised to the correct height and at the correct time

E4 Nesting (with automatic pre-labeling) 4

Tool change stand assists the operator to change tools quickly and easily

E4 Nesting (with automatic pre-labeling) 5

HSD Spindle : 9.6 Kw (Higher power available upon request)
Italian drill block : 5+4 vertical drills

E4 Nesting (with automatic pre-labeling) 6

Carousel Tool Changer
8 tools or more upon request. Servo drives for faster and more accurate motion available

E3/E4 Nested Based Production Flow

Automatic Infeed

1. Automatic Infeed

Vertical Drilling

2. Vertical Drilling

Nesting

3. Nesting

Automatic Outfeed

4. Automatic Outfeed

Printing Out Barcode

5. Printing Out Barcode

Dimension

E4-E3 Nesting Dimension
E4 NESTING with Automatic Pre-Labeling

E4 NESTING with Automatic Pre-Labeling

Spesifikasi E3 - E4 Nesting
MODEL
E3-1325D
Travelling size
2500 x 1260 x 200 mm
Working size
2440 x 1220 x 50 mm
Table size
2440 x 1228 mm
Loading and unloading speed
15 m/min
Transmission
X/Y rack and pinion drive Z ball screw drive
Table structure
Vacuum table
Spindle power
9.6 Kw
Spindle speed
24000 r/min
Traveling speed
45 m/min
Working speed
20 m/min
Tool magazine
Carousel
Tool slots
8
Driving system
Yaskawa
Voltage
AC380 / 3PH / 50HZ
Controller
Syntec / OSAI
MODEL
E4-1224D
E4-1530D
E4-1537D
E4-2128D
E4-2138D
Travelling size
2500 x 1260 x 200 mm
3140 x 1600 x 200 mm
3700 x 1600 x 200 mm
2900 x 2160 x 200 mm
3860 x 2170 x 200 mm
Working size
2440 x 1220 x 70 mm
3074 x 1550 x 70 mm
3685 x 1550 x 70 mm
2850 x 2130 x 70 mm
3800 x 2130 x 70 mm
Table size
2440 x 1228 mm
3074 x 1550 mm
3685 x 1550 mm
2850 x 2130 mm
3800 x 2130 mm
Loading and unloading speed
15 m/min
15 m/min
15 m/min
15 m/min
15 m/min
Transmission
X/Y rack and pinion drive Z ball screw drive
X/Y rack and pinion drive Z ball screw drive
Table structure
Vacuum table
Vacuum table
Vacuum table
Vacuum table
Vacuum table
Spindle power
9.6 Kw
9.6 KW
9.6 KW
9.6 KW
9.6 KW
Spindle speed
24000 r/min
24000 r/min
24000 r/min
24000 r/min
24000 r/min
Traveling speed
45 m/min
80 m/min
80 m/min
80 m/min
80 m/min
Working speed
20 m/min
25 m/min
25 m/min
25 m/min
25 m/min
Tool magazine
Carousel
Carousel
Carousel
Carousel
Carousel
Tool slots
8
8
8
8
8
Driving system
Yaskawa
Yaskawa
Yaskawa
Yaskawa
Yaskawa
Voltage
AC380 / 3PH / 50HZ
AC380 / 3PH / 50HZ
AC380 / 3PH / 50HZ
AC380 / 3PH / 50HZ
AC380 / 3PH / 50HZ
Controller
Syntec / OSAI
Syntec / OSAI
Syntec / OSAI
Syntec / OSAI
Syntec / OSAI

* All dimension subject to change

Butuh info lebih lanjut? Hubungi 031-3531718